The EZ-1 condensate drain is a combination of a solenoid valve and an electronic timer designed to automatically remove condensate from compressed air systems.
The EZ-1 is designed to remove condensate from compressors, compressed air dryers and receivers up to maximum 16 bar applications.
The EZ-1 offers true installation simplicity at the lowest possible cost.
The EZ-1 is a mass produced product available in various valve connection sizes and timer colour options.
TIMER | |
---|---|
Interval time | 0.5 - 45 minutes, adjustable |
Discharge time | 0.5 - 10 seconds, adjustable |
Supply voltage options | 24 - 240 VAC/DC, 50/60 Hz |
Current consumption | 4mA maximum |
Operating temperature | -40° C to +55° C |
Environmental protection | IP 65, NEMA 4 when installed |
Housing material | ABS plastic FR grade |
Connection | 43650A ISO 4400 |
Indicators | 1 LED (yellow) indicating ON 1 LED (yellow) indicating OFF |
VALVE | |
---|---|
Type | 2/2 way direct acting |
In/out ports | 1/4", 3/8" & 1/2" BSP or NPT |
Pressure range | 0 - 16 bar g |
Temperature range. | 2° C/55° C ambient |
Medium temp. | Max. 55° C |
Valve body | Brass, orifice 4.0 mm |
Supply voltage options | 24 - 240 VAC/DC, 50/60 Hz (100% ED) |
Coil Insulation Grade | H-grade |
Environmental Protection | IP 65 |
Valve seal | FPM |
See coil for correct voltage | Voltage tolerance +/- 10% |